新时时彩开奖直播

您好,歡迎進入中國機電產品進出口商會[請登錄][免費注冊] 我的辦公室 |客服中心|English

  • 資訊
  • 企業

WTO/TBT通報 (2018-8-2)

來源:CCCME 時間:2019-04-04 00:00:00

 1)捷克共和國通報一般性措施草案No0111-OOP-C085-16,規定了法定控制測量儀器的計量和技術要求,包括以下法定控制測量儀器的型式核準和檢驗測試方法:測定軌道車輛每軸或每輪載荷的測量裝置 G/TBT/N/CZE/208

內容如下:
測定軌道車輛每軸或每輪載荷的測量裝置,根據指令 2014/31/EU(非自動稱重儀器NAWI)在捷克共和國上市并投入使用。一旦投入使用,它們就會受到國家計量法規管轄-在規定的時間間隔內進行檢驗。通報的法律僅適用于已經投入使用的測量儀器的檢驗。不涉及上市或投入使用。
覆蓋以下產品:
測定軌道車輛每軸或每輪載荷的測量裝置;測量儀器(ICS 17.040.30)。
擬批準日期:2018/10/
擬生效日期:2018/10/
提意見截止日期: 通報之后60天
Description of content: Measuring devices for determining the load per axle or wheel of rolling stock are placed on the market and put into use in the Czech Republic in accordance with Directive 2014/31/EU (Non Automatic Weighing Instruments - NAWI). Once they have been put into use, they become subject to national metrological regulation - verification at specified intervals. This notified legislation only applies to the verification of measuring instruments that have already been put into use. It does not concern placing them on the market or putting them into use.
2)捷克共和國通報一般性措施草案No0111-OOP-C086-16,規定了法定控制測量儀器的計量和技術要求,包括以下法定控制測量儀器的型式核準和檢驗測試方法:測定道路車輛每軸載荷的測量裝置 G/TBT/N/CZE/209
內容如下:
測定道路車輛每軸載荷的測量裝置,根據指令 2014/31/EU(非自動稱重儀器NAWI)在捷克共和國上市并投入使用。一旦投入使用,它們就會受到國家計量法規管轄-在規定的時間間隔內進行檢驗。通報的法律僅適用于已經投入使用的測量儀器的檢驗。不涉及上市或投入使用。
覆蓋以下產品:
測定道路車輛每軸載荷的測量裝置;測量儀器(ICS 17.040.30)。
擬批準日期:2018/10/
擬生效日期:2018/10/
提意見截止日期: 通報之后60天
Description of content: Measuring devices for determining for determining the load per axle of road vehicles are placed on the market and put into use in the Czech Republic in accordance with Directive 2014/31/EU (Non Automatic Weighing Instruments - NAWI). Once they have been put into use, they become subject to national metrological regulation - verification at specified intervals. This notified legislation only applies to the verification of measuring instruments that have already been put into use. It does not concern placing them on the market or putting them into use.
3)捷克共和國通報一般性措施草案No0111-OOP-C065-16,規定了法定控制測量儀器的計量和技術要求,包括以下法定控制測量儀器的型式核準和檢驗測試方法:作為測量體積儀器使用的固定儲罐 G/TBT/N/CZE/210
內容如下:
作為測量體積儀器使用的固定儲罐,根據修訂的計量法案 No505/1990型式核準和初步檢驗之后作為法定控制測量儀器在捷克共和國上市并投入使用。通報的立法涉及國家計量法規中的測量儀器的型式核準和檢驗,即作為測量體積儀器使用的固定儲罐。
覆蓋以下產品:
作為測量體積儀器使用的固定儲罐; 體積,質量,密度,粘度的測量(ICS 17.060)。
擬批準日期:2018/10/
擬生效日期:2018/10/
提意見截止日期: 通報之后60天
Description of content: Fixed storage tanks used as instruments for measuring volume are placed on the market and put into use in the Czech Republic as legally controlled measuring instruments following type approval and initial verification pursuant to Act No 505/1990 on metrology, as amended. This notified legislation concerns national metrology regulation through type approval and verification of measuring instruments, i.e. fixed storage tanks used as instruments for measuring volume.
4)捷克共和國通報一般性措施草案No0111-OOP-C068-17,規定了法定控制測量儀器的計量和技術要求,包括以下法定控制測量儀器的型式核準和檢驗測試方法:流動振動相對氣體密度傳感器 G/TBT/N/CZE/211
內容如下:
流動振動相對氣體密度傳感器,根據修訂的計量法案 No505/1990型式核準和初步檢驗之后作為法定控制測量儀器在捷克共和國上市并投入使用。通報的立法涉及國家計量法規中作為測量液體流量的儀器和系統組件使用的測量儀器的型式核準和檢驗。
覆蓋以下產品:
流動振動相對氣體密度傳感器; 測量儀器(ICS 17.040.30)。
 
擬批準日期:2018/10/
擬生效日期:2018/10/
提意見截止日期: 通報之后60天
Description of content: Flow-through vibrational relative density transducers are placed on the market and put into use in the Czech Republic as legally controlled measuring instruments following type approval and initial verification pursuant to Act No 505/1990 on metrology, as amended. This notified legislation concerns national metrology regulation through type approval and verification of measuring instruments used as components of instruments and systems for measuring the flow volume of fluids.
5)捷克共和國通報一般性措施草案No0111-OOP-C069-16,規定了法定控制測量儀器的計量和技術要求,包括以下法定控制測量儀器的型式核準和檢驗測試方法:測量除水和液化氣體以外的液體流量的儀器和系統-車輛和儲罐車的除水以外液體動態測量系統 G/TBT/N/CZE/212
內容如下:
測量除水和液化氣體以外的液體流量的儀器和系統-車輛和儲罐車的除水以外液體動態測量系統,根據指令 2014/32/EU(測量儀器指令MID)在捷克共和國上市并投入使用。一旦投入使用,它們就會受到國家計量法規管轄-在規定的時間間隔內進行檢驗。通報的法律僅適用于已經投入使用的測量儀器的檢驗。不涉及上市或投入使用。對這些測量儀器的使用要求與MID完全兼容,并且也基于國際法定計量組織(OIML)建議117。本文件中列出的一些參數是新測量儀器的屬性;在此列出,是因為這些正在使用儀器的屬性在檢驗期間保留視覺或其它檢查方法。
覆蓋以下產品:
測量除水和液化氣體以外的液體流量的儀器和系統-車輛和儲罐車的除水以外液體動態測量系統; 流體流量的測量(ICS 17.120)。
ICS: 17.120                        HS: 9026.1000
擬批準日期:2018/10/
擬生效日期:2018/10/
提意見截止日期: 2018/09/27
Description of content: Instruments and systems measuring the flow volume of liquids other than water - dynamic measuring systems for liquids other than water, which are fitted to vehicles and tank-vehicles, are placed on the market and put into use in the Czech Republic in accordance with Directive 2014/32/EU (the Measuring Instruments Directive - MID). Once they have been put into use, they become subject to national metrological regulation - verification at specified intervals. This notified legislation only applies to the verification of measuring instruments that have already been put into use. It does not concern placing them on the market or putting them into use. The requirements imposed on these measuring instruments when in use are fully compatible with the MID and are also based on OIML  recommendation 117. Some parameters listed in this document are properties of the measuring instruments when they are new; They are listed herein only because the preservation of these properties when the instruments are in use is subject to visual or other checks during verification.
6)歐盟通報歐盟委員會法規草案,修訂歐洲議會和理事會法規(EC)No661/2009附錄IV,及歐洲議會和理事會關于更新引用并包括關于車輛型式核準的聯合國歐洲經濟委員會法規的指令2007/46/EC附錄I、III和IV(及其附錄)G/TBT/N/EU/591
內容如下:
本歐盟委員會法規草案的主要目的是更新一般安全法規(法規(EC)No661/2009)和關于機動車型式核準的框架指令(指令2007/46/EC)各自附錄中列出的對聯合國法規的引用,以確保技術進步不受阻礙。這是自2009年通過以來對一般安全法規的第5輪修訂。框架指令的附錄I、III和IV也得到了補充,以反映通過的關于國際整車型式核準統一規定的聯合國法規No0
覆蓋以下產品:
新機動車輛和系統,此類車輛的部件和單獨技術單元。
擬批準日期:2018年12月底
擬生效日期:在歐盟官方公報上公布之后20天
提意見截止日期: 通報之后60天
Description of content: The main objective of this draft Commission Regulation is to update the references to UN regulations listed in the respective annexes to the General Safety Regulation (Regulation (EC) No 661/2009)and the Framework Directive (Directive 2007/46/EC) on motor vehicle type-approval in order to ensure that technical progress is not hampered. This is the 5th cycle of amendments to the General Safety Regulation since its adoption in 2009. Annexes I, III and IV to the Framework Directive are also complemented to reflect the adoption of UN Regulation No 0 on uniform provisions concerning International Whole Vehicle Type Approval.
7)墨西哥通報墨西哥官方標準草案PROY-NOM-010-SCFI-2017:測量儀器-非自動稱重儀器-技術和計量要求、測試和檢驗方法(撤銷墨西哥官方標準草案PROY-NOM-010-SCFI-2014及撤銷墨西哥官方標準NOM-010-SCFI-1994)G/TBT/N/MEX/428 
內容如下:
通報的墨西哥官方標準草案規定了所有非自動稱重儀器和單獨評估模塊的計量和技術要求。以統一和可追溯的方式確定了評估計量和技術特性的要求和測試程序。
覆蓋以下產品:
非自動稱重儀器-關稅稅目:8423。
ICS: 17.060           HS: 8423
擬批準日期:待定
擬生效日期:通報的墨西哥官方標準作為最終標準在官方公報上公布之后480天生效
提意見截止日期: 2018/09/30 
Description of content: The notified draft Mexican Official Standard specifies the metrological and technical requirements applicable to all non-automatic weighing instruments, and to modules that are assessed separately. It also establishes the requirements and test procedures to assess metrological and technical characteristics in a uniform and traceable manner.
8)臺澎金馬單獨關稅區通報飲水機法定檢驗法規修訂提案 G/TBT/N/TPKM/331
內容如下:
自1990年5月1日起,根據商品檢驗法飲水機須經標準檢驗局(BSMI)強制檢驗。為了加強消費者保護和提高能源使用效率,BSMI提出采用最新版本的商品檢驗標準。BSMI將增加測試項目和方法,如標準CNS15929(2016)第6.3條“水溫”、第6.8條“儲罐容量”、第6.10條“每24小時功耗E24”和第13條“標志:(e)儲水容量和(j)每24小時功耗E24”
覆蓋以下產品:
飲水機; 其他(HS 841869), 即熱式或儲水式和浸入式電熱水器(HS 851610)。
擬批準日期:待定
擬生效日期:2020/01/01
提意見截止日期: 通報之后60天
Description of content: Water Dispensers have been subject to mandatory inspection under the Commodity Inspection Act by the Bureau of Standards Metrology and Inspection (BSMI) since 1 May 1990. To enhance consumer protection and promote efficiency of energy use, the BSMI proposes to adopt the latest version of inspection standards for the commodities. The BSMI will add test items and methods, stated in Sections 6.3 "water temperature," 6.8 "storage tank capacity," 6.10 "power consumption for preparation per 24 hours E24" and 13 "Mark: (e) water storage capacity and (j) power consumption for preparation per 24 hours E24" of the standard CNS 15929 (2016).The conformity assessment procedures remain the same, i.e. Registration of Products Certification (RPC) or Type-approved Batch Inspection (TABI).
9)臺澎金馬單獨關稅區通報度量衡法執行規則中的稱重儀器和體積計的類別與范圍草案 G/TBT/N/TPKM/333
內容如下:
為了通過對度量衡法執行規則第2條第1款中提到的儀器提供明確定義來促進法定儀器的管理,標準檢驗局(BSMI)現宣布稱重儀器(第2項)和體積計(第7項)的類別和范圍
覆蓋以下產品:
稱重儀器; 容量計(ICS:17.100,75.180.30)。
擬批準日期:待定
擬生效日期:待定
提意見截止日期: 通報之后60天
Description of content: With a view to facilitating the management of legal instruments by providing clear definition of instruments mentioned in Paragraph 1, Article 2 of the Enforcement Rules of the Weights and Measures Act, the Bureau of Standards, Metrology and Inspection is announcing the proposed categories and scopes of weighing instruments (Item 2) and volumeters (Item 7).

地址:北京市東城區建國門內大街18號(恒基中心)辦公樓2座8層 郵編:100005

電話總機:010-58280809 傳真:010-58280810,010-58280820 會員服務郵箱:[email protected]
會員服務熱線: 010-58280888,010-58280836(工作日上午8:00-12:00 下午13:30-17:00)

新时时彩开奖直播 MG线上试玩 四川时时开奖号码 买彩票大小单双的技巧 可以赚钱的游戏捕鱼 时时彩 排列5有什么好规律 投注新时时技巧 福彩欢乐生肖玩法 极速时时彩计划预测网 仲彩娱乐网